Direct Inject Acid Scavenger (No Sealant)
Direct Inject Acid Scavenger (No Sealant)
Direct Inject Acid Scavenger (No Sealant)
Direct Inject Acid Scavenger (No Sealant)
Direct Inject Acid Scavenger (No Sealant)
Load image into Gallery viewer, Direct Inject Acid Scavenger (No Sealant)
Load image into Gallery viewer, Direct Inject Acid Scavenger (No Sealant)
Load image into Gallery viewer, Direct Inject Acid Scavenger (No Sealant)
Load image into Gallery viewer, Direct Inject Acid Scavenger (No Sealant)
Load image into Gallery viewer, Direct Inject Acid Scavenger (No Sealant)

Direct Inject Acid Scavenger (No Sealant)

Regular price $34.95

Unit price per 

    LEAK SAVER DIRECT INJECT ACID SCAVENGER - ACID REMOVER ONLY (NO SEALANT) - FOR SYSTEMS UP TO 5 TONS (60,000 BTU, 17.6kW)

    • EASY SYSTEM ACID REMOVAL - The Leak Saver Acid Scavenger hunts acid in the refrigerant system and converts it into synthetic oil that enhances the system's lubrication, performance, and cooling. Removing acid is a MUST for protecting systems after compressor burnout. For preventative maintenance, it will prevent future acid buildup and degradation. Unlike other acid “neutralizers,” this product does not leave extra material in the system that reduce cooling efficiency.
    • THE MOST TRUSTED - Proudly made in the USA. We believe in the effectiveness of our product and stand behind it 100%.

    • WORKS WITH ALL SYSTEMS - Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more.

    • STRAIGHTFORWARD INSTALLATION - No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver Dry injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. Note: for automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below.

    • SAFE FOR ALL TOOLS AND PARTS - The Leak Saver Acid Scavenger is safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system.

    • REAL USA HVAC TECH SUPPORT - We are an American company owned and operated by EPA card holding HVAC techs. All questions are directly answered by us. If you need any support, please reach out to us HERE.

    • FREE SHIPPING to the continental USA.

      Leak Saver Direct Inject Product Data Sheet

      Open tab

      Installation Methods

      Open tab
      These installation methods can be used for all of our Direct Inject products

       

      1. Leak Shot HVAC Injection with Refrigerant Grade CO2

      Get your Leak Shot HVAC by clicking HERE

       

      2. Injection with High Side

       

      3. Charge in with Refrigerant

       

      4. Leak Shot Auto

      The Leak Saver 100% Satisfaction Guarantee

      Open tab

      Leak Saver 100 Satisfaction Guarantee

      As a small company, EVERY SINGLE CLIENT is important to us. Our sealant formula has been proven in millions of applications since 2015 and we stand behind it 100%. Your satisfaction is our priority! 


      If you have any issues with our products, please don't hesitate to reach out to us at info@leaksavers.com or fill out the form below. We will make it right!

      Close (esc)

      Popup

      Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

      Age verification

      By clicking enter you are verifying that you are old enough to consume alcohol.

      Search

      Shopping Cart

      Your cart is currently empty.
      Shop now